Only models in our 300 and 500 Series are for commercial use, and are subject to shorter warranty periods (see Warranty section).
How to Adjust FlexBounce™ Cords (if applicable) If you wish to change the firmness of your rebounder, turn it upside down. Then pull cord tighter to different knot, according to chart. See pic- ture for firmness settings. IMPORTANT: Grab cords with both hands and be sure to re-position bungee so ten- sion remains evenly distribut- ed. Not re-positioning will cause cord to wear unevenly. FlexBounce III Soft Setting on all FlexBounce connectors Medium Setting on every other connector Medium Setting on every connector Retain address information for future use. Retain address information for future use. JumpSport, Inc. 1680 Dell Ave. Campbell, CA 95008 U.S.A. Fitness Trampoline™ User's Manual Read these materials prior to assembling and using this rebounder trampoline Use trampoline only with mature, knowledgeable supervision. users, and to enforce JumpSport's rules for safe use. Soft Setting (factory setting) (Pictures are for illustration purposes only and may not match actual product.) FlexBounce III Configurations 1-877-507-1399 www.fitnesstrampoline.com Arched Leg, Non-Folding Models DO NOT allow more than one person on the trampoline. Use by more than one person at the same time can result in serious injury. FlexBounce VII shown here FlexBounce VII Configurations Soft Setting on all FlexBounce connectors Medium Setting on every other connector Soft / Medium / Medium Settings (repeat pattern) Medium Setting on every connector Firm Setting on every other connector Medium / Firm / Firm Settings (repeat pattern) Firm Setting on every connector Covered by one or more of the following US Patents: No.6.840,891, No.D666,266, and No. D680,609. Other US and International Patents Pending Copyright © 2003-2017, by JumpSport, Inc. All rights reserved. FlexBounce Instruction Manual P/N: INS-P-20764-03I